Using Qos Classifiers To Configure Quality Of Service For Outbound Traffic; Viewing The Qos Configuration; Using Qos Classifiers To Configure Quality Of Service For - HP ProCurve 5300xl Series Management Manual

Quality of Service (QoS): Managing Bandwidth More Effectively

Using QoS Classifiers To Configure Quality of Service for Outbound Traffic

N o t e
8-22
Using QoS Classifiers To Configure
Quality of Service for Outbound Traffic
QoS Feature
UDP/TCP Priority
IP-Device Priority
IP Type-of-Service Priority Disabled
LAN Protocol Priority
VLAN-ID Priority
Source-Port Priority
In addition to the information in this section on the various QoS classifiers,
refer to "QoS Operating Notes and Restrictions" on page 8-70.

Viewing the QoS Configuration

All of these commands are available on the 5300xl switches. All except the
protocol-priority command are available on the 3400cl/6400cl switches. Exam­
ples of the show qos output are included with the example for each priority
type.
Syntax: show qos < priority-classifier >
tcp-udp-port-priority
Displays the current TCP/UDP port priority configura­
tion. Refer to figure 8-11 on page 8-30.
device-priority
Displays the current device (IP address) priority con-
figuration. Refer to figure 8-12 on page 8-32.
Default Menu
Disabled —
Disabled —
—
Disabled —
Disabled —
Disabled —
CLI Web
page 8-24 Refer to Online Help.
page 8-30 "
page 8-36 "
page 8-49 "
page 8-51 "
page 8-57 "