Siemens SIMEAS Q80 Operating Instruction page 94

E-18 SIMEAS Q80 7KG8080
9.2 Assembly
The mounting of the device on a top-hat rail according to EN 60750 is performed as demonstrated below:
Mounting
1. Place the SIMEAS Q80 7KG8080 with its rail clip on to the top-hat rail (2) from above at the desired position (1).
2. Push the device gently downwards until clasp (3) catches.
Disassembly
3. Push the device downwards on the side of the rail until the clasp(3) is loose.
4. While in this position, tip the device forwards.
Power Quality Recorder SIMEAS Q80 7KG8080, Operating instruction
E50417-B1074-C419-A2, Release 09.02.2011