Configuring Temperature Alarm Thresholds For A Card; Clearing Unused 16-Bit Interface Indexes - HP A-F1000-E Getting Started Manual

[Firewall] job pc3
# Configure the task to be executed in the view of GigabitEthernet 0/3.
[Firewall-job-pc3] view GigabitEthernet 0/3
# Configure the Firewall to start GigabitEthernet 0/3 at 8:00 on working days every week.
[Firewall-job-pc3] time 1 repeating at 8:00 week-day mon tue wed thu fri command undo
shutdown
# Configure the Firewall to shut down GigabitEthernet 0/3 at 18:00 on working days every week.
[Firewall-job-pc3] time 2 repeating at 18:00 week-day mon tue wed thu fri command shutdown
[Firewall-job-pc3] quit
# Display information about scheduled tasks.
[Firewall] display job
Job name: pc1
Specified view: GigabitEthernet 0/1
Time 1: Execute command undo shutdown at 08:00 Mondays Tuesdays Wednesdays Thursdays
Fridays
Time 2: Execute command shutdown at 18:00 Mondays Tuesdays Wednesdays Thursdays Fridays
Job name: pc2
Specified view: GigabitEthernet 0/2
Time 1: Execute command undo shutdown at 08:00 Mondays Tuesdays Wednesdays Thursdays
Fridays
Time 2: Execute command shutdown at 18:00 Mondays Tuesdays Wednesdays Thursdays Fridays
Job name: pc3
Specified view: GigabitEthernet 0/3
Time 1: Execute command undo shutdown at 08:00 Mondays Tuesdays Wednesdays Thursdays
Fridays
Time 2: Execute command shutdown at 18:00 Mondays Tuesdays Wednesdays Thursdays Fridays
Configuring temperature alarm thresholds for a
card
You can set temperature alarm thresholds for a card by using the following commands. When the
temperature of a card reaches a threshold, the device generates alarms.
Follow these steps to configure temperature alarm thresholds for a card:
To do...
Enter system view
Configure temperature alarm
thresholds for a card

Clearing unused 16-bit interface indexes

In practice, the network management software requires devices to provide uniform and stable 16-bit
interface indexes. That is, a one-to-one relationship should be kept between an interface's name and the
interface's index on the same device.
Use the command...
system-view
temperature-limit slot-number
lower-value upper-value
104
Remarks
—
Optional