HP A-F1000-E Getting Started Manual page 135

Character
\Bcharacter
character1\w
\W
\
Example of filtering output information
Example of using the begin keyword
1.
# Display the configuration from the line containing "user-interface" to the last line in the current
configuration (the output information depends on the device model and the current configuration).
<Sysname> display current-configuration | begin user-interface
user-interface con 0
user-interface aux 0
user-interface vty 0 4
authentication-mode none
user privilege level 3
#
return
Example of using the exclude keyword
2.
# Display the non-direct routes in the routing table (the output depends on the device model and the
current configuration).
<Sysname> display ip routing-table | exclude Direct
Routing Tables: Public
Destination/Mask
10.1.1.0/24
Example of using the include keyword
3.
# Display the route entries that contain Vlan in the routing table (the output depends on the device model
and the current configuration).
<Sysname> display ip routing-table | include Vlan
Routing Tables: Public
Destination/Mask
192.168.1.0/24
Meaning
Matches a string containing
character, and no space is allowed
before character.
Matches character1character2.
character2 must be a number, letter,
or underline, and \w equals
[^A-Za-z0-9_].
Equals \b.
Escape character. If a special
character listed in this table follows
\, the specific meaning of the
character is removed.
Proto Pre Cost
OSPF 10 2
Proto Pre Cost
Direct 0 0
Remarks
For example, "\Bt" matches "t" in "install", but not
"t" in "big top".
For example, "v\w" matches "vlan", with "v" being
character1, and "l" being character2. v\w also
matches "service", with "i" being character2.
For example, "\Wa" matches "-a", with "-" being
character1, and "a" being character2, but does not
match "2a" or "ba".
For example, "\\" matches a string containing "\",
"\^" matches a string containing "^", and "\\b"
matches a string containing "\b".
NextHop
10.1.1.2
NextHop
192.168.1.42
129
Interface
Vlan2
Interface
Vlan999