Siemens SINUMERIK 840DE sl Manual page 24

Mounting
1. Insert the operator panel front in the panel cutout from the front.
Figure 3-2
2. Tilt and press the operator panel front into the panel cutout. The catches must be pressed
down.
24
Inserting the operator panel
NOTICE
Damage to the sealing
The seal must not be damaged when installing the device so that the maximum achievable
degree of protection can be fulfilled. Therefore, insert the OP 015 black centered in the
panel cutout.
Operator panel front: OP 015 black
Manual, 05/2019, A5E35227814B AB