Siemens SINUMERIK 840DE sl Manual page 82

Technical data
7.2 Ambient climatic and mechanical conditions
Table 7-2
Type of condition
Classification
Climate class
Ambient temperature
Biological environmental condi‐
tions
Chemically active environmental
conditions
Mechanical environmental condi‐
tions
Maximum permissible tempera‐
ture change
Relative humidity (without conden‐
sation)
Precipitation, rain
Water other than rain
Height
Condensation, splash water,
icing, salt spray
Transport and storage of operator panel fronts and diskette drives: -20° C to +55° C.
1)
Mold growth, slime, rodents, termites and other animal vermin are not permissible.
2)
In marine- and weather-resistant transport packaging (container).
3)
Transport packaging is either packaging that is directly suitable for transport or secondary packaging,
4)
which together with the product packaging, satisfies the requirements for transport.
Product packaging (storage packaging) is an individual packaging for storage and does not satisfy the
5)
requirements for transport. As a consequence, product packaging is therefore not suitable for
shipping.
For storage in the transport packaging.
6)
For storage in the product packaging.
7)
Note
Remove the transport protective foil and packaging material before installing the components.
82
Ambient conditions during storage and transport
1)
Class 2M3 according to EN
60721-3-2, in transport pack‐
Direct interaction in air/air:
-40°/+30° C at 95% relative
1 m/s and wet loading surfa‐
Permissible range/class
Transport
EN 60721-3-2
2K4
-40° C ... +70° C
2B1
2)
2C2
3)
aging
4)
humidity
5 to 95%
6 mm/min
2)
ces
6)
Max. 4,000 m above sea level
Permissible
Storage
EN 60721-3-1
1K4
-25° C ... +55° C
1B1
2)
1C2
3)
Class 1M2 according to EN
60721-3-1, in product packag‐
ing
5)
30 k/h
Not permissible
Not permis‐ 1 m/s and wet
sible loading surfaces
7)
Not permis‐ Permissible
sible
7)
Operator panel front: OP 015 black
Manual, 05/2019, A5E35227814B AB
6)
6)