Slide,Lever Tph; Housing,Motor Fan" And "Compl Pwb,Mc-6 - Sanyo DVP-P1EX Technical Information
Digital photo printer
Hide thumbs
Also See for DVP-P1EX:
- Instruction manual (56 pages) ,
- Service manual (20 pages) ,
- Instruction manual (56 pages)
Table of Contents
Advertisement
3-12. "SLIDE,LEVER TPH (5M000) "
(See Fig. 3-12-1)
1)
Referring to section 3-11, remove the "COMPL, HOLDER,
(5D000)
PINCH PICK
2)
Rotate the "SLIDE,LEVER TPH
the shape of the boss on it aligns with the shape of the hole
as shown in Fig. A of Fig. 3-12-1.
3)
Pull out the "SLIDE,LEVER TPH
ASSEMBLY NOTES:
1.
Apply grease (VJ8-0229) around the boss on the
"CAM,MECHANISM R
2.
Insert the boss all over into hole and rotate the
(5M000)
"SLIDE,LEVER TPH
arrow while pressing its base as shown in Fig. A of Fig.
3-12-1.
3.
Take care not to break the boss on the "SLIDE,LEVER
(5M000)
TPH
".
4.
Referring to section 3-9, align phase between the "CAM,
(5L000)
MECHANISM R
(5K000)
".
5.
Referring to section 3-6, adjust the tension of the
"BELT,MOTOR STEP
6.
Referring to section 3-7, adjust the tension of the "BELT,
(4I000)
DRUM
" is correct.
Boss
Apply grease
Fig. 3-12-1
".
(5M000)
" clockwise until
(5M000)
".
(5L000)
".
" in the direction of the
" and the "CAM,MECHANISM L
(4J000)
".
SLIDE,LEVER TPH
(5M000)
Hole
Fig. A
3-13. "HOUSING,MOTOR FAN (7N000) " and
"COMPL PWB,MC-6 (MC-6) "
(See Fig. 3-13-1)
1)
Referring to section 3-1, remove the "MOTOR,FAN DC
1.8W
(7M000)
" and the "GUIDE,INK-SVF01/EX
2)
Referring to section 3-3, remove the "COMPL,HOUSING
(2E000)
REEL T
3)
Release the "FIXER
4)
Referring to Fig. 3-3-2, disconnect the connector.
5)
Remove the two "SCR S-TPG BIN 2.6X4
"COMPL PWB,MC-6
6)
Remove the two "SCR S-TPG BIN 2.6X4
"HOUSING,MOTOR FAN
ASSEMBLY NOTES:
1.
Align each of the three dowels with each hole 2 on the
"HOUSING,MOTOR FAN
2.
Pass the cable through hole 1 and put portion A over hole
1 as shown in Fig. A of Fig. 3-13-1.
SCR S-TPG
BIN 2.6X4
Holes 2
(7H000)
Dowels
Hole 1
Cable
Portion A
–20–
".
(7Q000)
".
(7L000)
(MC-6)
".
(7H000)
(7N000)
".
(7N000)
" and install it.
HOUSING,MOTOR FAN
(7N000)
Dowel
FIXER (7Q000)
SCR S-TPG
BIN 2.6X4
SCR S-TPG BIN
(7L000)
2.6X4 (7H000)
COMPL PWB,MC-6
(MC-6)
Fig. A
Fig. 3-13-1
(03800)
".
" and
" and
Hole 2
Advertisement
Table of Contents
