S Reel Assembly - Sanyo DVP-P1EX Technical Information

3-2.

S REEL ASSEMBLY

(See Figs. 3-2-1 to 3-2-2)
3-2-1. "BELT, PAPER EXIT (6I000) ", "COMPL,
HOUSING REEL S (2A000) ", "GEAR,
RELAY PAPER EXIT (2B000) ", and
"COMPL PWB, MC-2 (MC-2) "
1) Remove the "BELT, PAPER EXIT
3-2-1.)
2) Remove the "SCR S-TPG BIN 2.6X4
remove the "COMPL PWB,MC-2
3-2-2.)
3) Remove the "SCR S-TPG BIN 2.6X4
Fig. 3-2-2.)
4) Remove the "COMPL, HOUSING REEL S
(Refer to Fig. 3-2-2.)
5) Remove the "GEAR, RELAY PAPER EXIT
(Refer to Fig. 3-2-2.)
ASSEMBLY NOTES:
1. After cleaning shaft 1, apply oil (VHJ-0099) around it.
(Refer to Fig. 3-2-2.)
2. Insert portion A on the "COMPL, HOUSING REEL S
(2A000)
" into hole on the "ASSY, CHASSIS R
as shown in Fig. A of Fig. 3-2-2.
3. Align dowel 1 on the "ASSY, CHASSIS R
hole 1 on the "COMPL, HOUSING REEL S
(Refer to Fig. 3-2-2.)
4. Install the "BELT, PAPER EXIT
Fig. 3-2-1
(6I000)
". (Refer to Fig.
(2H000)
" and
(MC-2)
". (Refer to Fig.
(2C000)
". (Refer to
(2A000)
(2B000)
(7A000)
(7A000)
(2A000)
(6I000)
" without bending.
ASSY,CHASSIS R (7A000)
BELT,PAPER
EXIT (6I000)
ASSY,CHASSIS R (7A000)
".
".
Shaft 1
Dowel 1
COMPL,HOUSING REEL S (2A000)
",
" with
".
–9–
Fig. A
COMPL PWB,MC-2 (MC-2)
Portion A
SCR S-TPG BIN
2.6X4 (2H000)
GEAR,RELAY
PAPER EXIT
(2B000)
Hole 1
SCR S-TPG BIN
2.6X4 (2C000)
Fig. 3-2-2