Siemens SIMATIC HMI Operating Instructions Manual page 94

Mounting and Connecting
4.4 Connecting the Industrial USB Hub 4
Procedure
Procedure:
1. Remove the clamping element.
2. Slide back the clamping element.
3. Insert the USB line through the opening of the sealing wedge.
4. Plug the USB line plug into the socket.
5. Slide the clamping element back against the USB line plug.
6. Turn the clamping elements to secure it.
7. Slide the clamping element back against the USB line plug.
8. Close the cover flap.
96
The port is now exposed so that the USB line plug can be easily inserted.
Operating Instructions, 09/2007, A5E00471973-02
Industrial USB Hub 4