Curling Your Hair - Silvercrest Quick Curl SHC 240 B2 Operating Instructions Manual

Curling your hair

Once you have made all settings on the appliance and the Temperature display 7
is permanently lit up (temperature reached):
1) Always use the hair template w to separate the hair strands and prevent the
hair from getting caught in the curling chamber 1 .
Make sure that the hair strand is only as thick as the punched hole in the hair
template w .
2) When placing the hair strand into the curling chamber 1, the opening must
be facing towards the head . Hold the appliance around 5 cm from your
scalp . The strand of hair must be inserted straight and taut .
3) Let go of the hair strand and press and hold the Start button u .
The roller 2 starts turning and winding up the strand of hair .
4) As soon as the set number of turns has been reached, the roller 2 stops and
the appliance beeps . You can now stop pressing the Start button u .
The set time starts counting down . As soon as the time has elapsed, you will
hear 3 beeps .
NOTE
► If a strand of hair gets caught in the curl chamber 1, the roller 2 stops,
you will hear 3 beeps and "Er2" appears on the display . Press the Release
button
device . Then press the On/Off button
again to continue curling .
■ 10 │ GB │ IE │ NI
5 cm
8 to release the mechanism and pull the hair strand out of the
r and make the desired settings
SHC 240 B2