Automatic Switch-Off; Cleaning And Care - Silvercrest Quick Curl SHC 240 B2 Operating Instructions Manual

5) Pull the appliance away from your head so that the strand slips out of the
curling chamber 1 .
6) Proceed in the same way with the other strands .
7) When you have finished styling your hair, press and hold the On/Off
button
8) Remove the plug from the mains power socket .
9) As soon as the appliance has cooled down, place the protective cap 3
onto the appliance .

Automatic switch-off

This appliance is fitted with an automatic switch-off system . After approximately
55 minutes, the appliance starts flashing . If you do not press any buttons for
another 5 minutes, the appliance will switch off automatically .
NOTE
► The automatic switch-off is designed merely as a safety feature in case
you forget to switch off the appliance! It is not intended as a substitute for
switching off the appliance with the On/Off button
the plug .

Cleaning and care

RISK OF ELECTRIC SHOCK
► Before cleaning the appliance, always pull out the plug from the mains
power socket . There is a risk of electric shock!
WARNING! RISK OF INJURY!
► Allow the appliance to cool down fully before cleaning it . Risk of burns!
CAUTION! PROPERTY DAMAGE!
► Do not use any aggressive, abrasive or chemical cleaning agents!
These could damage the surfaces of the appliance .
■ Clean the appliance using only a lightly moistened cloth .
■ Clean the hair template w with a damp cloth .
■ To clean the curling chamber 1 and the roller 2:
–
Fold the rubber tab forward and hold it firmly .
–
Slide the cleaning accessory q into the curling chamber 1 and turn it
several times around the roller 2 .
–
Pull out the cleaning accessory q and fold the rubber tab back again .
■ Allow the appliance to dry completely before reusing it or putting it away .
SHC 240 B2
r until you hear a beep and OFF appears on the display .
r and pulling out
GB │ IE │ NI │ 11 ■