Fujitsu F2MC-8FX Setup Manual page 2

PREFACE
Thank you for purchasing the F
03, referred to as "Starter Kit" in this manual).
This product is a starter kit for F
09 (F
MCU Board for MB95FV100-103, referred to as "MCU Board"), MB2146-401 (F
Evaluation Board, referred to as "Evaluation Board"), and F
sional Pack.
This manual explains how to use the Starter Kit. Be sure to read this manual before using the product.
For mass production/evaluation MCUs for this product, consult our Sales or Support representatives.
* : F
Handling and use
Handling and use of this product and notes regarding its safe use are described in the manuals for
products bundled with the Starter Kit.
Follow the instructions in the manuals to use this product.
Keep this manual at hand so that you can refer to it anytime during use of this product.
Caution of the products described in this document
The following precautions apply to the product described in this manual.
WARNING
Electric shock,
Damage
Electric shock,
Damage
2
MC Series BGM Adapter, referred to as "BGM Adapter"), MB2146-303 (F
2
MC is the abbreviation used for FUJITSU Flexible Microcontroller.
Indicates a potentially hazardous situation which, if not avoided appropriately,
could result in death or serious injury and/or a fault in the user's system.
Before performing any operation described in this manual, turn off all the power
supplies to the system. Performing such an operation with the power on may
cause an electric shock or device fault.
Once the product has been turned on, do not touch any metal part of it.
Doing so may cause an electric shock or device fault.
2 * 2
MC Series F MC-8FX Starter Kit (ver. 5V) (Model: MB2146-401-
2 MC-8FX MB95FV100-103 (ver. 5V), which comes with MB2146-
2
MC-8FX Family
2
MC-8FX Family
2 MC-8L/8FX Family S
OFTUNE
Profes-