Enabling Snmp Communication - Siemens SINUMERIK 840DE sl Commissioning Manual

Basic procedure
You can enter these commands either directly into the prompt or save the command in a script
or batch file:
● Direct input of the command:
– Call the prompt as the administrator.
– You can enter the commands either directly or in succession.
● Calling the command via a script file (or batch file):
– Save the command in a text file.
– Call the prompt as the administrator.
– Specify the script file as follows:
Further information
● MSDN Library - Netsh (command-line program)
cc785383(v=ws.7).aspx)
4.17.6

Enabling SNMP communication

Some network diagnostics functions use SNMP communication (e.g. in SINUMERIK Operate).
This is not blocked in the plant network. If, however, you have productively linked your plant
in the company network, SNMP communication is partially blocked:
● In the factory settings version of the PCU-Basesoftware, incoming SNMP communication
is blocked in the company network.
● Outgoing SNMP communication in the company network is not blocked.
In the settings for the Windows Firewall, you can activate SNMP communication via the
checkbox "SNMP Service" for specific network profiles.
Procedure
To permit incoming SNMP communication on the Siemens PC system, proceed as follows:
1. Click "Start > Control Panel".
2. Enter "Windows Firewall" in the search field and then click on "Windows Firewall" in the
search results.
PCU Base Software (IM10)
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
netsh -f <File name of the script file>
Configuration of the system
4.17 Adapting the firewall settings
(https://msdn.microsoft.com/en-us/library/
71