Setting The Signal Type; Setting The Volume; Selecting The Chime - Silvercrest HG01041B Assembly, Operating And Safety Instructions

The transmitter indicates the transmission of the signal to the receiver by
the signal indicator

Setting the signal type

The receiver can indicate the reception of a door signal either acoustically
or optically or both optically and acoustically.
Using the signal type selector sliding switch
the signal is to be indicated acoustically or optically or both optically
and acoustically.

Setting the volume

Press the volume button (VOL)
There are a total of 5 possible volume settings: very loud, loud, medi-
um, soft, very soft.

Selecting the chime

Note: The doorbell has 36 different chimes.
Press the melody selection button
Press the melody selection button
next audible signal.
14 GB
flashing briefly.
10
3
until the desired volume is reached.
. The first audible signal sounds.
4
again to move on to the
4
, select whether
5