NEC Express Server Express5800 Series Installation Manual page 26

Chapter 1 Installing Operating System
The "ADD A NEW MOUNT POINT" screen appears. Set [Mount Point] and [Desired Capacity], and click [Add
mount point].
For [Device Type], make sure to select "RAID1 (Redundancy)" for [RAID Level], and set [File System]. Create
all partitions according to the same procedure.
26
Do not allocate the /usr partition to the partitions other than the / (root) partition
Important
since the boot process becomes complex.
As the mount point of EFI System Partition , be sure to set /boot/efi.
Note
If [
Desired Capacity
Tips
Express5800/R320e-E4, R320e-M4 Installation Guide (Linux)
] is blank,
all the remaining spaces are used.
2. Setting up