Smart card reader and wireless passthrough
daughterboard
Removing the smart card reader and wireless passthrough
daughterboard
Prerequisites
1. Follow the procedure in
2. Remove the batteries.
3. Remove the
display
assembly.
4. Remove the heat-sink.
5. Remove the
system
fan.
6. Remove the
solid-state
7. Remove the WLAN.
8. Remove the WWAN.
9. Remove the microphone.
10. Remove the
front
camera.
11. Remove the
coin-cell
battery.
12. Remove the
system
board.
13. Remove the
docking
board.
About this task
The figure indicates the location of the smart card reader and wireless passthrough daughterboard and provides a visual representation of
the removal procedure.
before working inside your
drive.
tablet.
Removing and installing components
59