Computer Adjustment (Auto) - Sanyo PLV-45WR1Z Owner's Manual

Computer Adjustment (Auto)

The Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical to
conform to your computer. This function can be operated as follows.
Direct Operation
The Auto PC adjustment function can be operated directly by pressing
the AUTO PC button on the remote control.
Menu Operation
1 Select the PC Adjust Menu with the Point Up/Down button, and
then press the Point Right button to enter the sub-menu.
2 Choose the AUTO PC Adj. item and then press the OK button.
This Auto PC Adjust can also be executed by pressing the AUTO
PC button on the remote control.
Auto PC Adj.
Automatically adjusts Fine sync, Total dots, Horizontal, and Vertical for
the input signal from your computer.
To store adjustment data
Adjustment parameters from Auto PC Adjustment can be memorized
in this LCD Projection TV. Once parameters are memorized, the
setting can be done just by selecting Mode in the PC System Menu
(p46). See "Store" on page 49.
NOTE
The PC Adjust Menu cannot be operated when the input signal is digital or a signal
compatible with HDCP.
The Auto PC Adjust cannot be operated when 480i, 575i, 480p, 575p, 720p, or 1080i is
selected in the PC System Menu.
Remote Control
OK
ON
TIMER
AUDIO-S VIDEO-S S.SYS C.SYS
LAMP
SCREEN AUTO PC FREEZE
MODE
PC Adjust Menu
This arrow indicates that there
are other items. Select this
item and press the Point Down
button to go to the next item.
Computer Input
AUTO PC button
47