Maintenance And Cleaning; Warning Indicator - Sanyo PLV-45WR1Z Owner's Manual

Maintenance and Cleaning

Warning Indicator

The WARNING indicator shows the state of the function which protects the LCD Projection TV. Check the state of the
WARNING indicator and the POWER indicator to take proper maintenance.
The LCD Projection TV is shut down and the WARNING indicator is blinking red
When the temperature inside the LCD Projection TV exceeds the
normal temperature, the LCD Projection TV is automatically shut
down to protect the LCD Projection TV. The POWER indicator is
blinking red and the LCD Projection TV is being cooled down. When
the temperature inside the LCD Projection TV returns to normal, the
POWER indicator lights red and the LCD Projection TV can be turned
on.
NOTE:
Even after the temperature inside the LCD Projection TV returns to normal, the WARNING
indicator may keep blinking. The WARNING indicator stops blinking when the LCD
Projection TV is turned on again,.
Then check the items below.
Did you provide appropriate space for the LCD Projection TV to be
ventilated? Check the installing condition to see if ventilation slots
are not blocked.
Is the LCD Projection TV not installed near the ventilation duct of
air-conditioning equipment which may be hot? Install the LCD
Projection TV away from the ventilation duct of air-conditioning
equipment.
Is the air filter clean? Clean the air filter or replace it with a new
one.
The LCD Projection TV is shut down and the WARNING indicator lights red
When the LCD Projection TV detects an abnormal condition, it is
automatically shut down to protect the inside and the WARNING
indicator lights red. In this case, disconnect the AC power cord and
reconnect it, and then turn the LCD Projection TV on once again for
check. If the LCD Projection TV is turned off again and the WARNING
indicator lights red, disconnect the AC power cord and contact the
service station for check and repair.
CAUTION
DO NOT LEAVE THE LCD PROJECTION TV WITH THE AC
POWER CORD CONNECTED UNDER THE ABNORMAL
CONDITION. IT MAY RESULT IN FIRE OR ELECTRIC
SHOCK.
56
FRONT CONTROL
LAMP
REPLACE WARNING
FRONT CONTROL
LAMP
REPLACE WARNING
WARNING
blinking red
WARNING
lights red