Indicators And Condition Of The Lcd Projection Tv - Sanyo PLV-45WR1Z Owner's Manual

Lcd projection tv
Hide thumbs Also See for PLV-45WR1Z:
Table of Contents

Advertisement

Indicators and Condition of the LCD Projection TV

Check the indicators for LCD Projection TV condition.
Indicators
WARNING
POWER
red
red/green
• • • lights green.
• • • blinks green.
When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights orange. When this indicator lights
orange, replace the projection lamp with a new one promptly. Reset the Lamp replace counter after replacement of the lamp.
See page 58-60.
LCD Projection TV Condition
LAMP
REPLACE
orange
The LCD Projection TV is OFF. (The AC power cord is unplugged.)
The LCD Projection TV is preparing for stand-by or the projection lamp is
being cooled down. The LCD Projection TV cannot be turned on until cooling
is completed.
The LCD Projection TV is ready to be turned on with the POWER ON-OFF
button. The cooling fans are stopped.
The LCD Projection TV can be turned on with the POWER ON-OFF
button. The cooling fans are running.
The LCD Projection TV is operating normally.
Blinks slowly: The LCD Projection TV is in the Power management mode.
Blinks rapidly: The LCD Projection TV is turned on from the stand-by mode.
The temperature inside the LCD Projection TV is abnormally high. The LCD
Projection TV cannot be turned on. When the LCD Projection TV has
cooled down enough and the temperature returns to normal, the POWER
indicator lights red and the LCD Projection TV can be turned on. (The
WARNING indicator keeps blinking.) Check and clean the Air filter.
The LCD Projection TV has been cooled down enough and the temperature
returns to normal. When turning on the LCD Projection TV, the WARNING
indicator stops blinking. Check and clean the air filters.
The LCD Projection TV detects an abnormal condition and cannot be turned
on. Unplug the AC power cord and plug it again to turn on the LCD
Projection TV. If the LCD Projection TV is turned off again, disconnect the
AC power cord and contact the dealer or the service center for service and
checkup. Do not leave the LCD Projection TV on. It may cause electric
shock or a fire hazard.
• • • lights red.
• • • blinks red.
• • • lights orange.
• • • off
Appendix
63

Advertisement

Table of Contents
loading

This manual is also suitable for:

Plv-55wr1z

Table of Contents