Wipe Snapshot Operations (Menu) - Sony XVS-9000 User Manual

This switches the memory recall section to wipe
snapshot operation mode.
2
Press the register button for register with the wipe
snapshot you want to recall.
The selected button is lit orange, and the wipe
snapshot is recalled.
The set wipe pattern number is displayed on the top
right button in the memory recall section.
To cancel recalling of a wipe snapshot
Press the [UNDO] button.
Deleting a wipe snapshot
1
In the Flexi Pad control block, press the [WIPE]
button.
This switches the memory recall section to wipe
snapshot operation mode.
2
Press and hold the [DEL] button, and press the button
of the register in which the wipe snapshot you want to
delete is saved.
The selected button changes to register number
display.

Wipe Snapshot Operations (Menu)

Use the Wipe >Wipe Snapshot menu in each switcher
bank.
This section describes operations on the M/E-1 bank (M/
E-1 >Wipe >Wipe Snapshot menu) as an example.
Memory recall buttons
Button displays
You press buttons in the memory recall section to select
registers (1 to 10).
The wipe pattern image and pattern number are displayed
on buttons for registers with a registered snapshot. You can
also set to display the register name instead of the pattern
number in the Setup menu (see page 422).
Notes
• The menu settings of the memory recall buttons are
linked to the Flexi Pad control block.
• When both the main pattern and sub pattern are selected
for a pattern mix, the main pattern image and number are
displayed.
Selecting a wipe pattern
1
In the M/E-1 >Wipe >Wipe Snapshot menu (1157),
press the [Pattern No] memory recall button.
2
Use the numeric keypad window to enter the pattern
number consisting of up to three digits, and press [Enter].
The entry is applied, and the selected wipe pattern
image and pattern number are displayed in the
"Current Pattern No" field on the top left.
Saving a wipe snapshot
1
Configure the wipe you want to save.
2
In the M/E-1 >Wipe >Wipe Snapshot menu (1157),
press [Store], turning it on.
3
Press the memory recall button for the register you
want to save.
The selected button is lit orange, and the set wipe
pattern image and number are displayed.
Note
If you press a button in which a wipe snapshot is
already saved, the existing contents of the register will
be overwritten.
Recalling a wipe snapshot
In the M/E-1 >Wipe >Wipe Snapshot menu (1157), press
the memory recall button for the register with the wipe
snapshot you want to recall.
The selected button is lit orange, and the wipe snapshot is
recalled.
Deleting a wipe snapshot
1
In the M/E-1 >Wipe >Wipe Snapshot menu (1157),
press [Delete], turning it on.
151