Key Edge Modification; Dme Effects For Keys - Sony XVS-9000 User Manual

Setting the color cancel parameters
No. Parameter Adjustment
1 LUM Luminance
2 SAT Saturation
3 HUE Hue
5 FILTER Filter coefficient

Key Edge Modification

Press the [PAGE] button to display the page 2/3 setting
buttons. Press a key modifier button to select an edge type
(see page 107).
[BDR] button: Border
[DROP BDR] button: Drop border
[SHDW] button: Shadow
[SOFT EDGE] button: Soft edge
Pressing a button, turning it on green, displays the
parameter name and value of each parameter item on the
display.
Note
To use a normal, outline, emboss, or zabton key edge, use
the menu (see page 115).
Setting the border parameters
The parameters to configure vary depending on whether
the separate edge function is enabled/disabled.
The separate edge function is set using [Separate Edge] in
the Edge menu for the key.
When [Matte] is selected in the <Edge Fill> group of the
Edge menu for the key, you can adjust the color of the edge
fill.
When separate edge is disabled
No. Parameter Adjustment
1 WIDTH Border width
4 DENSITY Border density
When separate edge is enabled
The border width settings can be made independently for
left, right, top, and bottom sides. The separate edge
function is only available when luminance key, linear key,
color vector key, or chroma key is selected as the key type.
No. Parameter Adjustment
1 TOP Top edge width
2 LEFT Left edge width
3 RIGHT Right edge width
4 BOTTOM Bottom edge width
To adjust the edge fill color
Press the [MORE] button to display the 6th and subsequent
parameters, then adjust color 1.
Parameter group [2/2]
No. Parameter
1 LUM
2 SAT
3 HUE
4 DENSITY
Setting the drop border and shadow
parameters
When [Matte] is selected in the <Edge Fill> group of the
Edge menu for the key, you can adjust the color of the edge
fill.
No. Parameter Adjustment
1 WIDTH
2 POSITION
4 DENSITY
To adjust the edge fill color
Press the [MORE] button to display the 6th and subsequent
parameters, then adjust color 1.
Parameter group [2/2]
No. Parameter
1 LUM
2 SAT
3 HUE
4 DENSITY
Setting the soft edge parameters
No. Parameter Adjustment
1 SOFT
Notes
• When normal is selected for edge type, auto drop on
mode must be enabled beforehand to use soft edge.
• Enabling soft edge on a luminance key or linear key
disables clean mode.

DME Effects for Keys

For details about restrictions when using DME, see "DME
restrictions" (page 120).
126
Adjustment
Luminance
Saturation
Hue
Density
Width
Position
Density
Adjustment
Luminance
Saturation
Hue
Density
Edge softness