Replacing An Indicator - Huawei PDU8000 User Manual

PDU8000 Isolation Transformer Cabinet
User Manual
Step 3 Remove the fuse and install the new fuse in the original position.
Step 4 Reinstall the fuse cover, reinstall the panel, and check that the indicator or fan works properly
after the fuse is replaced.
----End

10.2 Replacing an Indicator

Prerequisites:


Procedure:
Step 1 Disconnect the fuse of the faulty indicator.
Step 2 Remove the indicator panel.
Figure 10-2 Indicator panel
Step 3 After checking that there is no voltage at the wiring terminal of the indicator, remove the
power cable of the indicator.
Step 4 Remove the indicator.
Issue 01 (2019-03-07)
Tools: Phillips screwdriver, protective gloves, multimeter
A spare indicator of the same model is available and functional.
Copyright © Huawei Technologies Co., Ltd.
10 Parts Replacement
35