SETTING LIGHT SENSITIVITY MANUALLY
You can change the sensitivity to manual control. Use this mode when you
expect blurring problems from camera motion, when you need to control depth
of field and when you want to control FLASH range.
Press the MENU button and use
the
buttons to select
SENSITIVITY.
Using the ▲▼ buttons, you may
select the desired sensitivity from
[100] [200] or [400].
Situations for Manual Sensitivity Control
・When the image is too dark ,but you can't use the flash.
Or when the image is blurry, but you can't use the flash.
・When you must be moving the camera in order to get a shot.
OR when the object is blurry from moving at high speed.
・When you are anticipating problems in MACRO mode or any close-up situation.
When you get blurry results in MACRO or any close-up situation.
・When you want to record a distant object with the FLASH.
You can extend the range of the FLASH by increasing the sensitivity.
Turn the DIAL SWITCH to PHOTO MODE and
then turn the POWER ON.
57