Romoving The Em820W From The Main Board Of Pc - Huawei EM820W Hardware Manual

Hspa+ pc embedded module

Hide thumbs Also See for EM820W:

Table of Contents

HUAWEI EM820W HSPA+ PC Embedded Module

Hardware Guide

Step 2 Press downwards to fix the EM820W in the module slot.

Step 3 Use a screwdriver to fix the EM820W on the main board of the PC with two screws

provided in the EM820W packing box.

Step 4 Insert the connector of the main antenna into the MAIN antenna interface (M) of the

EM820W according to the indication on the label of the EM820W. Insert the

connector of the auxiliary antenna into the AUX antenna interface (A) of the c

EM820W in the same way.

6.3.2 Romoving the EM820W from the Main Board of PC

Step 1 Disconnect the antenna cables from the EM820W. You can lift the connectors using

a small screwdriver.

Issue 01 (2010-12-09)

Insert the antenna connectors vertically into the antenna interfaces of the EM820W.

Do not press or squeeze the antenna cable or damage the connectors. Otherwise, the

wireless performance of the EM820W may be reduced or the EM820W cannot work

normally.

Ensure that the antenna cables are routed through the channel in the frame of the PC and

do not lay the cables across the raised edges of the frame.

Huawei Proprietary and Confidential

Mechanical Specifications

Table of Contents