Toro EVOLUTION Series Manual page 6

6. The controller should detect the sensor. Confirm that the
device ID detected matches the sensor's actual ID.
ADD/REMOVE DEVICE
WEATHER
DEVICE ID
STATUS
CORRECT?
SN: 054331
If it does match, press
If it does not match, change to NO, press
steps 3-6.
6
05 43 31
ACTIVE
YES
and continue to add the sensor.
, and repeat
7. The next step is to enter the location information. It is
possible to enter either by zip code or Latitude and
Longitude coordinates (available from Google Maps®).
MY LOCATION
TYPE
ZIP CODE
To adjust TYPE, press
to select LONG/LATor ZIP CODE.
Press
8. Press . Adjust the Zip Code or Latitude and
Longitude values with the
Use and to switch between number fields.
9. When done, move to CONTINUE. Press
After a moment, the screen returns to the
ADD/REMOVE DEVICE screen.
The sensor is now added. The sensor must be assigned to a
Schedule in order for it to manage the irrigation system.(see
page 9).
ZIP CODE
92504
CONTINUE
to move to ZIP CODE.
and buttons.
.