Weather Sensor Menu; Current Adjust; Temperature; Rain Status - Toro EVOLUTION Series Manual

Weather Sensor Menu

SENSORS

CURRENT ADJUST

TEMPERATURE

RAIN STATUS

FREEZE OFF AT

DRYOUT DAYS

Current Adjust
The percentage that the weather sensor is going to adjust the
irrigation runtime. Possible values range between OFF and
+150; in the majority of cases, the values will display between
±35%. For example, if the evapotranspiration (ET) historical
data calls for a hot season, but the week has in fact been
cloudy, the "Current Adjust" might show "-20%" to reflect the
decreased runtime. It can also display OFF.
Temperature
Displays the current temperature at the sensor location.
Temperature unit (Celcius or Farenheit) can be changed in the
controller preferences settings (see the EVOLUTION
manual).
Rain Status
Displays the state of the rain sensor: DRY or WET.
10

Freeze Off

The temperature at which irrigation will be turned off due to
cold temperatures. Selections range from 29°- 45°F in 2 degree
increments. This feature can also be toggled to "OFF".
---
1. Press
81 F
°
DRY
29 F
°
2. Press
02
Dryout Days
After a rain, it is not always necessary to resume irrigation right
away. Setting a Dryout Days period, from zero to 14 days,
delays the automatic resumption of irrigation.
1. Press
2. Press

Water Adjust

®
user
Water Adjust allows the runtime of all stations in all schedules
to which the Weather Sensor has been assigned to be adjusted
by a maximum of ±35%. For example, if the programmed
runtime for station 1 is 10 minutes, setting a Water Adjust of
+35% would adjust that run time to 13 minutes, 30 seconds.
This is useful for seasonal changes.
or to raise or lower the temperature value,
or turn feature off.
to input the value.
It is possible to disable the Freeze Off feature.
Lowering the temperature past 29°F will show OFF.
Press the to input the value.
or to increase or decrease the number of
days to "dryout".
to input the value.