Recording Status; Recording Statistics; Image Posting - Bosch MIC IP fusion 9000i Operation Manual

42 en | Recording
6.6

Recording Status

Details of the recording status are displayed here for information. These settings cannot be
changed.
6.7

Recording Statistics

Recording
Identifies the current recording profile (1 or 2).
Zoom
Identifies the current zoom factor of the camera (1x, 2x, 4x, or 8x).
Averaging period
Select the appropriate averaging period as a means of stabilizing the long term bit rate.
6.8

Image Posting

Image size
Select the appropriate image size: Small, Medium, Large, 720p, 1080p, Best possible.
File name
You can select how file names will be created for the individual images that are transmitted.
–
–
–
VCA overlays
To include VCA overlays in the email, select this check box.
Posting interval
Enter the interval in seconds at which the images will be sent to an FTP server. Enter 0 (zero)
if you do not want any images to be sent.
The following field may or may not appear, depending on your camera:
Post JPEG from camera
Click the checkbox to select the cameras from which JPEG images are sent. An enabled video
input is indicated by a check mark.
For MIC IP fusion 9000i cameras, select checkbox 1 for the visible imager; select checkbox 2
for the thermal imager.
Target
Select the target—the name of the account on the server—to which to save images.
When face recognition is available, selected images of the face can be sent to a target
account.
Enable
Check the box to enable best face posting.
File format
Select the type of image to be sent.
Target
Select the target account for best face posting.
Timeout
2019-11 | 1.2 |
Overwrite The same file name is always used and any existing file will be overwritten with
the current file.
Increment A number from 000 to 255 is added to the file name and automatically
incremented by 1. When it reaches 255 it starts again from 000.
Date/time suffix The date and time are automatically added to the file name. When
setting this parameter, ensure that the unit's date and time are always correctly set.
Example: the file snap011005_114530.jpg was stored on October 1, 2005 at 11:45 and
30 seconds.
Operation Manual
MIC IP fusion 9000i
Bosch Security Systems