Uploading A User Logo; Two-Line And Three-Line Camera Titles - Bosch MIC IP fusion 9000i Operation Manual

72 en | Using your MIC Camera
11.5

Uploading a User Logo

Customers have the option to upload custom logos that display on the web browser of the
device.
All user logo images must comply with the following requirements:
–
–
–
Upload the Logo File
1.
2.
3.
4.
5.
6.
7.
Set Logo Transparency (Optional)
1.
2.
3.
Change the Camera Title
1.
2.
3.
4.
11.6

Two-line and Three-line Camera Titles

There are two options to display camera titles, but these should not be used together. Choose
one of the following modes.
–
–
Mode 1: Azimuth/Elevation/Compass/Zoom Options
Select one of the following options:
–
–
Mode 2: Camera Title combined with Compass
Select one of the following options. Users can toggle between the two options.
–
2019-11 | 1.2 |
The file format must be a bitmap (.bmp).
Height and width must not exceed 128 pixels.
Color depth must be 8 bit (256 color bitmap).
If necessary, open the browser. Click Configuration.
Click General. Select Display Stamping.
Select the field Camera name stamping. Select the position of the logo: Bottom, Top, or
Custom.
Note: If you select Custom, then additional fields (Position (XY)) appear where you can
specify the exact position of the logo. In the fields Position (XY), enter the values for the
desired position (0 - 255).
Click Logo Browse to open a file-search dialog. Select the image file (.bmp).
Click Upload to transfer the file to the camera.
The message "Upload successful" should appear.
The new logo, if applicable, replaces the previous one.
Select the field Logo position. Select the position of the logo on either side of the camera
name: Left, Right, or Logo only. (The default value is Off.)
Click Set to save.
Click the check box Transparent background.
Click Set to save.
Note that the color of the entire first line of the logo is the color that will be changed to
transparent in the remainder of the logo. For example, if the first line is white, then all of
the identical white colors of the logo image will become transparent.
Click General. Select Identification.
Delete all of the text in the field Camera name.
Rename the camera if desired.
Click Set to save.
Mode 1: Azimuth/Elevation/Compass/Zoom Options
Mode 2: Camera Title combined with Compass
Display Azimuth/Elevation and ZOOM value (Optical/Digital) at the bottom of the screen.
Use the command AUX ON-95-ENTER.
Display Azimuth/Elevation/Compass at the bottom of the screen. Use the command AUX
ON-96-ENTER.
Display two (2) lines of text at the top of the video. Use the command AUX ON-75-ENTER.
Operation Manual
MIC IP fusion 9000i
Bosch Security Systems