Setup/Installation Menu Layout; Navigating The Menu System; Black - Toshiba 42HP95 Owner's Manual

Setup / Installation menu layout
To open the Installation menu (illustrated below), press MENU on the remote control or TV side panel, open the Setup menu, select
Installation, and press ENTER.
From Main Menu/Setup
menu, select "Installation"
sub-menu

Navigating the menu system

You can use the buttons on the remote
control or TV side panel to access and
navigate your TV's on-screen menu system.
• Press MENU to open the menu system.
• Use the up/down/left/right arrow
buttons (yzx •) on the remote
control or TV side panel to move in the
corresponding direction in a menu.
• Press ENTER to save your menu
settings or select a highlighted item. (A
highlighted menu item appears in a
different color in the menu.)
• All menus close automatically if you do
not make a selection within 60 seconds,
except the signal meter menu which
closes automatically after 5 minutes.
• To close a menu instantly, press EXIT.
38
#01E_037-038_4250HP95 38

Black

(E) 42/50HP95 *web 213:276
Chapter 4: Menu layout and navigation
Input Configuration
Terrestrial Channel Program
Channel Add/Delete
Signal Meter
IEEE1394 Devices
Devices
TheaterNet Devices
TV Guide On Screen™ Setup
Time and Date Start Setup
System Status System Information
TV side panel
y
z
•
x
MENU (ENTER*)
EXIT
*The MENU button on the TV
side panel functions as the
ENTER button when a menu is
on-screen.
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
[ Input Configuration Window ]
}
ANT1
[ Scan for new channels on desired Antenna ]
ANT2
[ Channel Add / Delete Window ]
[ Signal Meter Window ]
[ IEEE1394 Device Management Window ]
[ TheaterNet Setup Window ]
Start [ Launch the TV Guide On Screen™ to its Installation area ]
[ Time And Date Setup Window ]
[ System Information Window ]
Remote control
05.9.12, 10:06 PM
MENU
ENTER
y
x •
z
EXIT