Adjusting The Audio Quality; Using The Stablesound Feature; Black - Toshiba 42HP95 Owner's Manual

Adjusting the audio

Adjusting the audio quality

You can adjust the audio quality by adjusting the bass, treble,
and balance.
To adjust the audio quality:
1. Press MENU and open the Audio menu.
2. Highlight Audio Settings and press ENTER.
Audio
Audio Settings
Advanced Audio Settings
Audio Setup
Navigate Select Back
CH RTN
3. Press z or y to highlight the item you want to adjust
(Bass, Treble, or Balance).
Audio Settings
Bass 50
Treble 50
Balance 0
StableSound
Reset
4. Press x or • to adjust the level.
• x makes the bass or treble weaker or increases the balance
in the left channel (depending on the item selected).
• • makes the bass or treble stronger or increases the balance
in the right channel (depending on the item selected).
5. To save the new settings, highlight Done and press
ENTER. To reset the settings to the factory defaults,
highlight Reset and press ENTER.
#01E_081-088_4250HP95 87

Black

(E) 42/50HP95 *web 213:276
Chapter 8: Using the TV's features
(continued)
Exit
EXIT
Off
Done
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
Using the StableSound
®
The StableSound feature limits the highest volume level to
prevent extreme changes in volume when the signal source
changes (for example, to prevent the sudden increase in volume
that often happens when a TV program switches to a
commercial).
To turn on the StableSound ® feature:
1. Press MENU and open the Audio menu.
2. Highlight Audio Settings and press ENTER.
Audio
Audio Settings
Advanced Audio Settings
Audio Setup
Navigate Back Exit
Select CH RTN EXIT
3. Press z to highlight StableSound, and then press x or • to
select On.
Audio Settings
Bass 50
Treble 50
Balance 0
StableSound Off
Reset Done
4. To save the new settings, highlight Done and press
ENTER. To reset the settings to the factory defaults,
highlight Reset and press ENTER.
Note: The RESET function returns your audio adjustments to
the following factory settings:
Bass ............. center (50)
Treble .......... center (50)
Balance ........ center (0)
StableSound ... Off
To turn off the StableSound feature:
Select Off in step 3 above.
05.9.12, 10:10 PM
® feature
87