Using Mpeg Noise Reduction; Using Dynamic Contrast; Black - Toshiba 42HP95 Owner's Manual

Adjusting the picture

Using MPEG noise reduction

The MPEG noise reduction feature allows you to reduce visible
interference caused by MPEG compression. Choices for MPEG
noise reduction are High, Medium, Low and Off. Off is
automatically selected when this feature is disabled ("grayed
out"). This feature is not available in the PC input mode.
To select the MPEG noise reduction level:
1. Press MENU and open the Video menu.
2. Highlight Advanced Picture Settings and press ENTER.
Video
Picture Settings
Advanced Picture Settings
Theater Settings
3. Press z to highlight the MPEG Noise Reduction field, and
then press x or • to make a selection.
Advanced Picture Settings
Dynamic Contrast
MPEG Noise Reduction
CableClear
Color Temperature
Reset
4. To save the new settings, highlight Done and press
ENTER. To revert to the factory defaults, highlight Reset
and press ENTER.
#01E_081-088_4250HP95 83

Black

(E) 42/50HP95 *web 213:276
Chapter 8: Using the TV's features
(continued)
ANT 1
On
Off
Auto
Cool
Done
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.

Using dynamic contrast

When dynamic contrast is set to "On," the TV will detect
changes in the picture quality that affect the appearance of your
contrast settings and then automatically adjust the video.
When dynamic contrast is set to "Off," the settings selected in
the Contrast field in Picture Settings will be used.
To select dynamic contrast preferences:
1. Press MENU and open the Video menu.
2. Highlight Advanced Picture Settings and press ENTER.
Video
Picture Settings
Advanced Picture Settings
Theater Settings
3. Press z to highlight the Dynamic Contrast field, and then
press x or • to make a selection (On or Off ).
Advanced Picture Settings
Dynamic Contrast On
MPEG Noise Reduction Off
CableClear Auto
Color Temperature Cool
Reset Done
4. To save the new settings, highlight Done and press
ENTER. To revert to the factory defaults, highlight Reset
and press ENTER.
Note:
If you select one of the factory-set picture modes (Sports,
Standard, or Movie) and then set the dynamic contrast to "On,"
the picture mode automatically changes to Preference in the
Picture Settings menu.
05.9.12, 10:09 PM
ANT 1
83