About The Connection Illustrations; Connecting A Digital Cablecard - Toshiba 50HPX95 Owner's Manual

About the connection illustrations

You can connect different types and brands of devices to your TV in several different configurations. The connection illustrations in
this manual are representative of typical device connections only. The input/output terminals on your devices may differ from those
illustrated herein. For details on connecting and using your specific devices, refer to each device's owner's manual.

Connecting a digital CableCARD™

This digital television is capable of receiving analog basic, digital
basic, and digital premium cable television programming by
direct connection to a cable system providing such
programming.
A security card (such as a digital CableCARD™), provided by
your cable operator, is required to view encrypted digital
programming.
Certain advanced and interactive digital cable services (such as
video-on-demand, a cable operator's enhanced program guide,
and data-enhanced television services) will not work with the
™
use of a CableCARD and may require the use of a separate set-
top box from your cable operator.
For more information, call your local cable operator.
You will need:
one digital CableCARD ™
digital cable subscription service (contact your cable
operator)
TV back panel
From digital Cable service
(connect to ANT 1 only)
This cable should be connected to ANT 1 terminal directly. If you connect
the cable via a VCR, the TV may not receive the signals correctly.
________
CableCARD is a trademark of Cable Television Laboratories, Inc.
Chapter 2: Connecting your TV
(contact your cable operator)
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
To view encrypted digital channels:
1. Connect your digital Cable TV cable to ANT 1.
2. With the front of the CableCARD
the CableCARD ™ slot on the back of the TV (see
illustration below left).
™
3. After the CableCARD is inserted, a CableCARD
appears in the Applications menu, with informational
screens provided by your digital CableCARD
page 56 for additional information.
CableCard Connected -- Acquiring
channel information.
CableCard services will only operate
with cable signal connected to Antenna 1.
Note:
• Always use the EJECT button to remove the CableCARD™. Never
remove the CableCARD™ by hand.
• Never insert any object or card (including, without limitation, a
PCMCIA card) other than a CableCARD™ into the CableCARD™
slot.
• Always make sure the CableCARD™ is facing the correct direction.
• Connect the cable for your digital cable TV service to ANT 1 only.
• When using a CableCARD™, channel programming is unnecessary
because the CableCARD™ automatically loads the cable channel
list into the TV's channel memory (page 47).
• The CableCARD™ may take up to 5 minutes to "pair" with the TV
and download channel information. CableCARD™ information and
channels will not be available until this process is completed.
CableCARD™ technology, like all new and emerging technology, may
from time to time experience compatibility issues due to the different ways
in which television manufacturers and cable system operators implement
the CableCARD™ specifications. Most issues can be easily resolved. In
the event that you experience any performance-related CableCARD™
issues with your Toshiba television, please contact the following:
• In the U.S., call TACP Consumer Solutions at (800) 631-3811 or visit
http://www.tacp.com/customersupport/contact.asp.
• In Canada, call TCL Customer Service at 1-800-268-3404.
™ facing up, insert it into
™
option
™
service. See
Applications
TV Guide On Screen IP Service
Audio Player Conditional Access
Picture Viewer CableCARD(tm) Status
Digital CC/Audio Selector Network Setup
CableCARD CableCARD(tm) Pairing
Navigate Select Back Exit
CH RTN EXIT
15