Using The Pc Setting Feature; Using The Long Life Feature; Picture Shift - Toshiba 50HPX95 Owner's Manual

Using the PC setting feature

You can adjust the horizontal position/size, vertical position/size,
clock phase, and sampling clock. This feature will be grayed out
on the menu unless there is a PC connected to the TV (See
"Connecting a personal computer (PC)" on page 29.)
To set the PC setting:
1. Confirm a PC is connected (see "Connecting a personal
computer (PC)" on page 29).
2. Repeatedly press INPUT to select PC input mode. (See
"Selecting the video input source to view" on page 72.)
3. Press MENU and open the Setup menu.
4. Highlight PC Settings and press ENTER.
Setup
Installation
Sleep Timer
On/Off Timer
PC Settings
HDMI 1 Audio Auto
HDMI 2 Audio Auto
Slide Show Interval 2 Sec
Navigate Select CH RTN Back EXIT
5. Press y or z to highlight the item you want to adjust.
6. Press x or • to make the appropriate adjustments.
PC Settings
Horizontal Position 0
Horizontal Width 0
Vertical Position 0
Vertical Height 0
Clock Phase 0
Sampling Clock 0
Reset Done
• Horizontal Position/Vertical Position:
Adjusts picture left/right and up/down. The adjustment range
is within ±5 from center.
(The adjustable range may vary depending on the input mode.)
• Horizontal Width/Vertical Hegiht:
Adjusts picture width of Horizontal and picture height of Vertical.
The adjustment range is within ±5 from center.
• Clock Phase:
This function is to reduce noise and sharpen the picture.
The adjustment range is within ±15 from center.
• Sampling Clock:
This function is to minimize periodic vertical stripes on the
screen.
The adjustment range is within ±15 from center.
Chapter 8: Using the TV's features
Exit
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.

Using the Long Life feature

The long life settings (Picture shift, Gray level, Reverse, and
White) help to reduce the risk of phosphor burn-in of the
plasma screen.

Picture Shift

With Picture Shift set to on, the picture imperceptibly moves
around the screen intermittently to reduce the risk of phosphor
burn-in of the plasma screen.
Note: To reduce the risk of phosphor burn-in, the default setting for
the Picture Shift function is On.
To activate the picture shift feature:
1. Press MENU and open the Setup menu.
2. Highlight Long Life and press •.
Setup
On/Off Timer
Picture Shift
PC Settings
Gray Level
HDMI 1 Audio Auto
Reverse
HDMI 2 Audio Auto
White
Slide Show Interval 2 Sec
AVHD Skip Time 15 min
Long Life
Navigate Select CH RTN Back EXIT
3. Press y or z to highlight the Picture Shift, and then press
•.
4. Press y or z to select On.
Setup
On/Off Timer Picture Shift
PC Settings Gray Level
HDMI 1 Audio Auto Reverse
HDMI 2 Audio Auto White
Slide Show Interval 2 Sec
AVHD Skip Time 15 min
Long Life
Navigate Select CH RTN Back EXIT
To deactivate the picture shift feature:
Select Off in step 4 above.
NOTICE OF POSSIBLE ADVERSE EFFECTS ON
PLASMA DISPLAY
Avoid displaying stationary images on your Plasma display for
extended periods of time. Fixed (non-moving) images (including,
but not limited to, PIP/POP windows, closed captions, video game
patterns, TV station logos, stock tickers, and websites) and
special formats that do not use the entire screen, can become
permanently ingrained in the Plasma display and cause subtle,
but permanent, ghost images. This type of damage is NOT
COVERED BY YOUR WARRANTY. See pages 4 and 5 for
details.
On
1
Exit
On
1
On
Off
Exit
95