Table Of Contents - Siemens ADVIA 2400 Maintenance Procedures

Table Of Contents

Maintenance5
Daily Maintenance6
Cleaning The Probes Using Manual Probe Motion7
Probe Cleaning Procedure (Optional Method)8
Inspecting And Cleaning The Mixing Rods And Mixer Wash Cups9
Checking Reagents And System Solutions10
Inspecting And Cleaning The Cuvette Splash Covers13
Inspecting And Cleaning The Probe Wash Cups14
Checking Pumps For Leaks15
Checking Other Vertical Pumps For Leaks16
Performing The Startup Wash (Wash3)17
Performing The Shutdown Wash19
Performing Additional Ise Electrode Washes20
Weekly Maintenance21
Checking And Replenishing The Lamp Coolant22
Checking Lamp Energy23
Reading Lamp Energy Data25
Cleaning The Analyzer And Rack Handler Exterior Panels27
Monthly Maintenance28
Cleaning The Inside Of The Reagent Tray Refrigerated Housing29
Cuvette Wash And Cuvette Conditioner Usage30
Cleaning And Replenishing The Cuvette Wash Bottle31
Cleaning The Chiller Filter33
Every 2 Months Maintenance34
Cleaning And Replenishing The Cuvette Conditioner Bottle35
Every 3 Months Maintenance37
Washing The Ise Electrodes Lines39
Every 4 Months Maintenance41
Cleaning The Pure-Water Bottle Filter42
Replacing The Reaction And Dilution Cuvettes44
As Required Maintenance47
Restoring System Files48
Replacing Dpp Probes Equipped With Crash Detection51
Replenishing The Rrv (Reaction) Bath Oil Bottle54
Preventive Cleaning Of The Wash Station Lines55
Washing All The Ise Lines59
Washing The Lines60
Conditioning The Ise Na And K Electrodes61
Replacing Ise Electrodes62
Removing Electrodes63
Priming The Ises64
Storing The Reference Electrode65
Cleaning The Waste-Drain Nozzle66
Maintaining The Ise Unit After The Dilution Bowl And Waste-Drain Nozzle Are Clean67
Preparing The System For Power Return (If Power Was Unexpectedly Lost While System Was On)68