Siemens SIMATIC ET 200MP Manual page 12

Properties
The module has the following technical properties:
● 8 analog inputs
● Voltage measurement type can be set per channel
● Current measurement type can be set per channel
● Resistor measurement type can be set per channel
● Resistance thermometer (RTD) measuring type can be set per channel
● Resolution 16 bits including sign
● Configurable diagnostics (per channel)
● Hardware interrupt on limit violation can be set per channel (two low and two high limits
per channel)
The module supports the following functions:
Table 2- 1 Version dependencies of the module functions
Function
Firmware update
Identification data I&M0 to I&M3
Parameter assignment in RUN
Isochronous mode
Calibration in runtime
Module-internal Shared Input (MSI)
Configurable submodules / submodules
for Shared Device
You can configure the module with STEP 7 (TIA Portal) and with a GSD file.
Accessories
The following accessories are supplied with the module and can also be ordered separately
as spare parts:
● Shield bracket
● Shield terminal
● Power supply element
● Labeling strips
● U connector
● Universal front door
Analog Input Module AI 8xU/I/R/RTD BA (6ES7531-7QF00-0AB0)
Manual, 03/2019, A5E44792324-AA
Firmware version
of the module
(TIA Portal) as of V15.1 and
V1.0.0 or higher
V1.0.0 or higher
V1.0.0 or higher
---
---
V1.0.0 or higher
(PROFINET IO only)
V1.0.0 or higher
(PROFINET IO only)
Configuration software
STEP 7
(TIA Portal) V12 or higher,
HSP 0275 or STEP 7 V5.5 SP3 or
X
X
X
---
---
X
(PROFINET IO only)
X
(PROFINET IO only)
Product overview
2.1 Properties
GSD file in STEP 7
higher
X
X
X
---
---
X
X
11