ABB SM2000 Compact Flash Hardware Installation page 2

...3 Fitting Media Board
Sub-Assembly – Figs. 3.1 to 3.5
3) Remove the chassis top cover and PCB locking bar –
see Fig. 3.2.
Remove pozidriv screws
(one each side)
Remove PCB locking bar
4) Remove the existing media board sub-assembly –
see Fig. 3.3.
2
Remove pozidriv screws
Information. Refitting is the
reverse of removal.
Disconnect configurator
2
1
4
Fig. 3.2 Removing the Chassis Top Cover and PCB Locking Bar
Lift black
1
retaining flap
Disconnect
flexi-circuit
4
(1 each side)
3
board ribbon cable
Fig. 3.3 Removing the Media Board Sub-Assembly
1
neither Compact Flash nor SmartMedia
option is already fitted to the instrument.
Main board
2
Lift up top cover
3
Remove top cover
✶
Note. Flexi-circuit is not present if
Lift main board from
5
motherboard and withdraw
media board
Media board