Managing The Power Supply System - HP 12500 Series Installation Manual

The first method is called "cold reboot" or "cold startup". The second and third methods are called
"warm reboot" or "warm startup", and can be used remotely.
For data security, if you reboot the switch while the switch is performing file operations, the switch does
not reboot.
The precision of the rebooting timer is 1 minute. One minute before the rebooting time, the switch
prompts "REBOOT IN ONE MINUTE" and reboots in one minute.
To reboot cards or switches immediately at the CLI, execute one of the following tasks as needed in user
view:
Task
In standalone mode, reboot a
card, or the switch
immediately.
In IRF mode, reboot an IRF
member switch, a card on the
switch, or all IRF member
switches.
To schedule a reboot, execute either of the following commands in user view:
Task
Specify the reboot date and
time.
Specify the reboot delay time.

Managing the power supply system

You can use the following display commands and proper configuration commands to manage the power
supply system of your switch.
Displaying the electrical label data for the power monitor
module
Use the display device manuinfo power-monitor command to display the electrical label data for the
specified power monitor module, including the module name, serial number, manufacturing date, and
vendor name.
In standalone mode:
•
# Display the electrical label information about power monitor module 2.
<Sysname> display device manuinfo power-monitor 2
PowerMonitor 2:
DEVICE_NAME
DEVICE_SERIAL_NUMBER : 210212A0310106000043
MAC_ADDRESS
MANUFACTURING_DATE
Command
reboot [ slot slot-number ] [ force ]
reboot [ chassis chassis-number
[ slot slot-number ] ] [ force ]
Command
schedule reboot at time [ date ]
schedule reboot delay time
: LSTM2PMUA
: NONE
: 2012-10-21
63
Remarks
If you reboot the active MPU or do not
specify the slot keyword, the reboot
command reboots the switch.
If you reboot the active MPU or do not
specify the slot keyword, the reboot
command reboots the member switch.
Remarks
By default, the reboot date and time is
not specified.
By default, the reboot delay time is not
specified.