Silvercrest SWV 733 A2 Operating Instructions And Safety Instructions page 80

SilverCrest SWV 733 A2
No wireless connection to the wireless router
 The distance to the wireless router is too great, thus reduce it.
No LAN connection
 Check whether the network cable is inserted correctly into the WAN/LAN socket (6) or LAN socket
(7) of the dual-band Wi-Fi range extender and into the LAN socket of your end device.
Connection with the WPS button fails (connection attempt to the wireless router)
 Establish the connection with the WPS button again.
 Reset the dual-band Wi-Fi range extender to its original condition. To do so, press the Reset button (5)
for approximately 3 seconds with a sharp object and then release it again. The LEDs then briefly go
out and this will reboot the dual-band Wi-Fi range extender. The dual-band Wi-Fi range extender
requires a certain amount of time (boot time) before it is ready to use. Wait for approximately 30
seconds before using the dual-band Wi-Fi range extender. Then establish the connection with the WPS
button again.
 Eliminate sources of interference between the dual-band Wi-Fi range extender and the wireless router.
 The distance between the dual-band Wi-Fi range extender and the wireless router is too great, thus
reduce it.
78 - English