Huawei SUN2000-4.95KTL-JPL0 Quick Manual page 10

Enclosure Dimensions
2
Installing the SmartACBox
2.1 Preparing for the Installation
Installation Space
2.2 Installing the Mounting Bracket
The mounting bracket has four groups of tapped holes, each group containing four tapped holes.
Mark any hole in each group based on site requirements and mark four holes in total. Two round
holes are preferred.
Wall-mounted Installation
Avoid drilling holes in the water pipes and cables buried in the wall.
Mounting Bracket Dimensions
Expansion Bolt
(1) Expansion sleeve (2) Flat washer
(3) Spring washer
M12x60 expansion bolts and M12x40 bolt
assemblies are delivered with the
SmartACBox. M12x40 bolt assemblies are
used for support-mounting and pole-mounting
the SmartACBox. Such a bolt assembly
consists of a flat washer, a spring washer, and
an M12x40 bolt.
9
(4) M12x60 bolt