Huawei SUN2000-4.95KTL-JPL0 Quick Manual page 24

3. Set LAN parameters.
•
If the SmartLogger is connected to a
local area network (LAN) and a proxy
server has been set, you need to
cancel the proxy server settings.
•
If the SmartLogger is connected to
the Internet and the PC is connected
to the LAN, do not cancel the proxy
server settings.
a. Open Internet Explorer.
b. Choose Tools > Internet Options.
c. Click the Connections tab and then click
LAN settings.
d. Clear Use a proxy server for your LAN.
e. Click OK.
2
Commissioning Through Deployment Wizard
1. Enter https://192.168.0.10 in the
address box of the browser
(192.168.0.10 is the default IP address
of the SmartLogger). If you log in to the
WebUI for the first time, a security risk
warning is displayed. Click Continue to
this website.
2. Select Advanced User or Special
User.
3. Click Deployment Wizard and set parameters as prompted. Power Meter, Third-part NMS,
and Third-part Devices are not involved. Click Skip.
Parameter Description
Language Set this parameter as required.
To commission the device, select
User name Advanced
User or Special User.
•
The initial password is Changeme.
•
Use the initial password upon first
power on and change it
immediately after login. To ensure
account security, change the
password periodically and keep the
new password in mind. Not
changing the initial password may
cause password disclosure. A
password left unchanged for a long
Password
period of time may be stolen or
cracked. If a password is lost,
devices cannot be accessed. In
these cases, the user is liable for
any loss caused to the PV plant.
•
If you enter wrong passwords for
five consecutive times within 5
minutes, your account will be
locked out. Try again 10 minutes
later.
Click Help to view the parameter description.
23