Huawei SUN2000-4.95KTL-JPL0 Quick Manual page 11

•
To prevent dust inhalation or contact with
eyes, wear safety goggles and an anti-dust
respirator when drilling holes.
•
Clean up any dust in and around the holes
using a vacuum cleaner and measure the
distance between holes. If the holes are
inaccurately positioned, drill a new set of
holes.
•
Level the head of the expansion sleeve with
the concrete wall after removing the bolt,
spring washer, and flat washer. Otherwise, the
mounting bracket will not be securely installed
on the concrete wall.
2. Install expansion bolts.
Support-mounted Installation
1. Mark hole positions.
1. Mark hole positions.
3. Secure the mounting bracket.
2. Drill holes. (You are
advised to apply anti-rust
paint on the hole positions
for protection.)
10
3. Secure the mounting
bracket.