HP -UX 11i Installation And Update Manual page 102

Step 1. Update OS to new word-width:
Step 2. Install the desired OE:
Disk space usage
error
swinstall analysis
error
Post-update
swverify error
In Case of Trouble
Common Update Problems
Action: Complete the update. Then remove the HPUX11i-OE-Ent bundle
using the swremove command.
Changing from the Enterprise Operating Environment to the
Mission Critical Operating Environment at the same time as you
change from a 32 bit OS to a 64 bit OS is not a tested
operation...
Action: Although you can change OS word-width and move from one OE
to another at the same time, we recommend performing separate
operations. In this case:
/usr/sbin/update-ux -s /cdrom -a 64
/usr/sbin/update-ux -s /cdrom HPUX11i-OE-MC
For more about changing OEs, see "Changing Operating Environments"
in Chapter 2.
To perform this OS update, it is required that the xxx
partition have at least yyy KB of free space and it currently
has zzz KB of free space
Action: Reconfigure your disk per the minimum recommendations in
the message. Then run the update-ux command again. For help
configuring disk space usage, see "Adjusting File System Size" in this
appendix.
The analysis phase failed while installing from the first
depot. See the /var/adm/sw/swagent.log for details.
Action: The swinstall analysis on software from HP-UX 11i CD1 failed
and update-ux quit. Correct the indicated problem and run the command
again.
After updating your system to an HP-UX 11i OE, run swverify to ensure
that all application software previously on you system is still compatible
with the new OS. If you get an error like this:
The product "xyz,l=/,r=B.xx.xx" is not compatible with this
system's architecture or operating system.
The indicated software (xyz) has not been updated to 11i. To update the
software, mount the HP-UX 11i Applications CD that contains the
102 Appendix B