HP -UX 11i Installation And Update Manual page 114

In Case of Trouble
Problems Configuring HP-UX 11i
Step 2. The available I/O cards are listed in the
A5149A HBA you want to replace (be sure the entire line containing the
adapter is highlighted).
Step 3. On the menu bar, select:
SAM performs a Critical Resource Analysis (CRA). See the Configuring
HP-UX Peripherals manual for more about CRA.
Step 4. When the CRA finishes, select
HP-UX Peripherals manual for more information about what SAM
normally does next.
The follow error message appears:
OLRAD error: General error.
Do not be concerned about this message; it does not affect the result of
the OLR process.
Step 5. Select
OK
A dialog box with this message appears:
Errors have prevented the completion of this on-line card
operation.
back on-line now?
may be brought on-line later using Actions->Bring On-line.
Step 6. Select:
No
Step 7. Disconnect the SCSI cable from the A5149A's external connector.
The green power LED for the A5149A's slot should be off.
Step 8. Still in the
Status reflects that the SCSI driver is suspended and slot power is OFF.
Step 9. Replace the A5149A HBA as described in the "Managing PCI Cards with
OLA/R" chapter of the Configuring HP-UX Peripherals manual.
Step 10. Still in the I/O Cards screen, you'll see the available I/O cards. Select the
A5149A HBA you want to bring online (be sure the entire line containing
the adapter is highlighted).
Step 11. On the menu bar, select:
114
Actions -> Replace
or press the
Return/Enter
Should all suspended cards or ports be brought
If [No] is selected, these cards or ports
screen, select:
I/O Cards
Actions -> Bring On-Line
screen. Select the
I/O Cards
to continue. See the Configuring
OK
key.
Options -> Refresh List
Appendix B