Installing Hp-Ux 11I - HP -UX 11i Installation And Update Manual

Required media
Typical install time Cold-installing HP-UX 11i typically takes from 2-3 hours, depending
Step 1. Insert the HP-UX 11i CD1 into the drive.
Step 2. Stop the autoboot:
Step 3. Ensure that Fast Boot is enabled (the full memory check run when Fast
Step 4. Search for bootable devices, using the choices displayed (for example,

Installing HP-UX 11i

Have these CDs ready from the HP-UX 11i media box:
• HP-UX 11i OE CDs 1 and 2, June 2001 or later.
• Support Plus CD, June 2001 or later (for general release patch
bundle, quality patch bundles and diagnostics.
upon the system and whether you are installing only the OS or also
installing an OE.
To do a cold installation:
Make sure any external devices connected to the target system are
turned ON and operational. Then turn the system ON or cycle power.
• On workstations, press and hold down the
• On servers, press any key.
You will see the boot console menu. Boot procedures vary somewhat
between computers. If you need help, enter:
HELP
Boot is OFF may take several hours on a large system):
1. Select the Configuration Menu: CO
2. If the Fast Boot selection is available, switch Fast Boot ON:
FB ON
3. Return to the Main Menu: MA
enter search or sea).
Path# Device Path
----- -----------
P0 SESCSI.2.0
Chapter 2
Cold-installing HP-UX 11i
Esc
You'll see a table similar to this:
Device Type
-----------
TOSHIBA CD-ROM
Migrating to HP-UX 11i
key.
41