Name And Function Of Each Part - Hitachi EH-RMP2 Applications Manual

2.3

Name and function of each part

Name and function of each part
No. Name
1] Lock button
2] Communication connector
3] USB communication
connector
4] LED display
5] Rotary switch
6] Reset switch
7] Side DIP switch
 Description of Connector
Connector
PROFIBUS
1
6
9
5
1] Lock button
4] LED display
3] USB communication connector
5] Rotary switch
6] Reset switch
2] Communication connector
7] Side DIP switch
Press this button to dismount.
Module can be fixed firmly by a screw of M4 × 10mm (0.39in).
D-sub 9-pin connector for communication cable.
Type-B USB connector for configuration.
The status of module is displayed on this LED.
This is a rotary switch to set network input / output sizes.
The module can be reset by pressing this switch when the module
detected an error.
At the time the RDYLED is turned off immediately after the press,
it will be reset.
This is a switch to set an operation mode.
Symbol Indication
Communication
PROFIBUS
connector
Model name
Weight
Current consumption
(5VDC)
Dimensions (mm (in.))
Function
D-sub 9 pin connector.
Terminal layouts are shown below.
Pin No.
1 NC
2 NC
3 B-Line
4 NC
5 GND
6 +5 V DC
7 NC
8 A-Line
9 NC
2 – 3
Chapter 2 Specifications
EH-RMP2
0.16 kg
( 0.35 lb )
0.78 A
30 (1.18)
95 (3.74)
Remarks
Please do not press and
hold the reset switch.
Details
Details