Chapter 6
Troubleshooting
6.2
New entry of slave unit to PROFIBUS
New entry of slave unit to PROFIBUS, slave units may fall to enter PROFIBUS communication, when new entry or
restarting from communication error.
In this case, reboot the slaves that do not online.
6.3
Startup time of EH-RMP2
It takes approximately 10 seconds until EH-RMP2 starts I/O communication with the slave devices after the
initialization since EH-RMP2 can deal with large size input / output data.
Therefore, please not use input / output data of EH-RMP2 until the bits of all using slave state are 1 in the LINK
information flag area.
6 – 2