Table of Contents
Advertisement
■Online Configuration
Please set up the I/O assignment from a programming tool before configuration.
(1) Set up as shown in Figure 4.1.3-1, turn on power to the EH-RMP2 and connect the USB cable to config port.
(If a power supply is turned ON, with a USB cable connected, it will be detected as a device unknown at
Windows.)
(2) Drag the [Profibus DPV0] - [Master] - [NETX 100DP/DPM] to the gray colored bus.
(When coming to the right position, the mouse pointer will change from
Double click the "netX".
Hereafter the following figure screen is called as main screen.
②Double click
①Drag
4 – 5
Chapter 4
to
.)
Operation
Advertisement
Table of Contents
