Controller Installation - LG MULTI V HYDRO KIT ARNH963K2A4 Installation Manual

Medium temperature
Table of Contents

Advertisement

CONTROLLER INSTALLATION

Hydro Kit Wired Remote Controller
Installation
(Included with the Hydro Kit)
• Always have power off before installing the controller.
Never operate Hydro Kit outside of the operational parameters
as outlined in this manual and the product specifications.
Never touch wiring or install accessories with wet hands.
care not to damage wiring that is routed through the wall.
death.
• See the Installation section for guidelines on where to place the
controller.
• The controller is designed to be surface mounted. Recessing the
misread the zone temperature.
1. If not already done so, separate the Hydro Kit controller from its installation plate.
• To separate, insert a small screwdriver into one of the two holes at the bottom of the installation
plate. Gently turn clockwise.
• Repeat for the remaining hole, and then gently pull on the bottom of the controller body.
physical injury or death if the electrical components are damaged.
2. Determine how the Hydro Kit communications cable (female end) will be routed to the controller.
Choose either through the back, using the top groove, or using right groove.
• If using the top or right groove, use needle nose pliers to carefully break off the tab.
• If using the back, route the communications cable through the handy box or wall, and through the
large hole in the installation plate.
3. Attach the controller installation plate to the wall or handy box using the factory-provided screws. Ensure the plate is level and securely
attached to the wall.
72
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG Life's Good" is a registered trademark of LG Corp.
Figure 75: Routing the Communications Cable.
Cable Grooves
2
3
1
1. Back
2. Top
3. Right
Figure 76: Hydro Kit Controller Communications Cable Termination
Detail.
Male Plug
Check if Connector
is Correctly Installed.
OK
Female Plug
2
Optional LG Extension Cable
(Sold Separately)
Figure 77: Location of the Controller
Installation Plate Screws.
3
Hydro Kit

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents