Controller Operation - LG MULTI V HYDRO KIT ARNH963K2A4 Installation Manual

CONTROLLER OPERATION

Hydro Kit Controller Operation
Table 26: Controller Main Screen Display.
Controller Component
Operation Display Window
Back Button
Up / Down / Left / Right Button
OK Button
On / Off Button
Operation Settings
Operation Mode
The desired operation mode can be easily controlled. From the main
screen, press the Left < and Right > buttons to select the operation
to set the operation mode.
Some products may not support some operation modes.
AI / Auto Operation
AI / Auto Operation applies only to heating. To save energy and provide high comfort levels, the set temperature will follow outside tempera-
ture. If the outdoor temperature decreases, heating capacity for the room will increase automatically to maintain the temperature. All param-
eters must be set by the trained service provider during start-up, and must be adapted to the environment of the installation site.
1. Select AI / Auto Mode.
2. Select the desired temperature category.
3.
Figure 80: Select AI / Auto Mode.
74
Function
Displays Operation and Set Status
Returns to the Previous Stage from
the Menu's Set Stage
Changes the Menu's Set Value
Saves the Menu's Set Value
Turns the Hydro Kit ON / OFF
Figure 81: Select the Temperature Category.
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG Life's Good" is a registered trademark of LG Corp.
Figure 79: Controller Main Screen Display.
Operation Display
Window
Back Button
Up/Down/Left/Right
Button
Table 27: Operation Modes.
Mode
Hydro Kit provides cool water to use for desired
Cool
Hydro Kit provides hot water to use for desired
Heat application (example: floor heating or domestic hot
Heating setpoint is automatically determined by a
AI / Auto
pre-defined temperature profile.
Figure 82: Select the Temperature.
122°
OK On/Off Button
OK Button
Description
application.
water).
-5.4