Table of Contents
Advertisement
Available languages
Available languages
CONTENTS
1
2
3
4
5
6
7
8
9
10
11
12
13
1 Security characteristics
The max inlet pressure is 0.8MPa(8bar).
01
Warning:
02
If the power cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly quali ed persons in order to avoid a hazard.
02
The pressure-relief device is to be operated regularly to remove lime
deposits and to verify that is not blocked.
03
CAUTION: In order to avoid a hazard due to inadvertent resetting of the
thermal cut-out, this appliance must be not supplied through an external
03
switching device, such as a timer, or connected to a circuit that is
04
regularly switched on and o
This appliance can be used by children aged from 8 years and above and
04
persons with reduced physic sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision
08
instruction concerning using of the appliance in a safe way and understand
the hazards involved. Children shall not play with the appliance. Cleaning
08
and user maintenance shall not made by children without supervision.
08
This electrical water heater must be installed with a mono-directional
safety valve at the inlet pipe (blue indicator) when the tank's pressure is
09
over 0.8MPa. Water will automatically ow out from drain pipe outlet of the
safety valve (Diagram 1) if pressure exceeds 0.8Mpa. In any condition, this
10
outlet must not be blocked.
If you need to empty the water in the tank, rst please close the cold
10
water inlet. Remove the xed screw nail on the safety valve, lift up the
plastic handle (Diagram 2) so that the water can ow out naturally.
by the utility.
Fixed Screw Nail
Safety Valve Outlet
Diagram 1
Water-drainage position
Water-drainage Spanner
Diagram 2
01
Hide quick links:
Advertisement
Chapters
Table of Contents
